Lpg Retrofitment Centre

Product Details:

By focusing on various demands of our respected clients, we are providing an exclusive range of Lpg Conversion Car. This product is tested in terms of quality in order to deliver a defect free range. Our product is developed from the superior quality basic material as per the set industry norms. The offered product is available in different specifications to meet the exact needs of the customers.

Features:

• Precisely designed
• Optimum performance
• Does not make pollution

Product Details:

Engines of any  car available on the market has  hiding enormous potential. The reason is that the cars at the factory are not adjusted individually,but  serially and according to the generalized settings of its work.  The  "STAG TUNING" device unlocks the hidden resources of  power, what influences the optimization of setting of particular car, so that the user would be able to ride more dynamically,  safer and even more economical.

 Chip-tuning as a module «STAG TUNING" improves the efficiency and power of the engine in the full rotary range . As a result, we obtained  a safe increase in power and, what is more important  more torque  increases up to 20%, resulting in an mprovement of engine’s flexibility  even while 1500 rpm. Vehicle becomes more dynamic, without increasing fuel consumption. Installation "STAG TUNING" is very simple; we need only to connect two wires. No special knowledge is required, or intervention in a vehicle computer. It's a completely safe, independent module.
 
Application: (Only for turbocharged engines):
• indirect injection
• Direct injection
• Diesel

Benefits of using «STAG TUNING":
• increase flexibility and efficiency in all gears at all speeds,
• minimize the effect of the so-called "turbo lag"
• the possibility of individual characteristics of  power waveform  and torque.

Technical parameters:
• built-in processor for emulation of control signals
• No access to modify the software in the engine control unit, so that the owner is not exposed to brake the warranty on the purchased car.
• The ability to simultaneously emulation of  2 channels boost pressure
• does not cause problems with the engine computer error "Check"
 • Can be used in vehicles with a diesel engine with turbo sensor.

Comparison of performance diagrams  from the dyno - stand for two popular types of car Skoda:

 

Octavia 1.8 - 160 KM

 

 

 

Roomster 1.2 TSI CBZB 105 KM

 

 

 

 

Legend for the test:
Yellow thick line - torque reference (factory)
Yellow thin line - torque  with STAG TUNING module  
Blue thin line - engine power (factory)
Red thin line - engine power  with "STAG TUNING" module

 

STAG TUNING application supported of Windows versions  and up to 7 including version. Application of Windows 8 is not supported.

Opportunity to purchase a USB cable to the product.

 

STAG TUNING is a safe device to use, provided that the person uses the results obtained in a reasonable and do not strain the engine continuously. It should be noted that an excessive burden on the car can cause damage to the mechanical components of the engine and powertrain.

Product Details:

Authorised dealer
AC SA is a Polish leader and also an important world’s manufacturer of automotive LPG/CNG systems under STAG brand. AC SA has been operating on the Polish automotive market for more than 27 years and currently it has been the largest company in the segment of gas installations in Poland. According to its own estimates, AC SA has more than 50% share in the Polish market.
The products offered by AC SA are delivered to more than 40 countries all over the world. In 2011, the sale for foreign contractors represented 63% of the total income of AC SA. The key foreign clients of AC SA include Germany, Russia, Ukraine, Turkey, and Thailand.
The Company offers safe, cost effective, and environment friendly solutions. The policy followed by the Company focuses on the principal objective, which is: customer satisfaction by supplying top quality innovative products.

Product Details:

Approx. Price: Rs 21,000 / Pack
Product Details:
Minimum Order Quantity1 PackColorBlackUsage/ApplicationAutomobileMaterialplasticVehicle Typepetrol cars
Lovato auto gas has obtained most highly acknowledge homologation and approval certificates at an international level, it attest the quality standards achieved by the company.
Lovato auto gas is supplying gas conversion system in the market which is deliver high quality performance and reliability, interested engine life, improved mileage and lower emission.
In India Lovato conversion kit has created its own brand image and running successfully in more than two million cars from last sixteen years, are the best possible proof of the success of a design that is characterized by reliability and ease of installation.
The product have been approved and accepted by Indian govt. Department like ARAI / VRDE / ICAT / CIRTas well as RTO.Request
Callback

Product Details:

Product description:

AC STAG 200 GoFast - full LPG/Autogas 4 cylinder conversion

GoFast is a versatile controller designed for installation in most cars (sequential, semi-sequential, “full group”).
The device has been designed as simple as possible the entire system, and a significant shortening of the time needed for installation and calibration of the system. Created controller is based on a 32-bit processor and components of automotive, which proves its modern design and reliability.

GoFast benefits
• fast installation due to the minimal number of wires,
• Simple and clear calibration program - only two dialog window,
• processor has the ability to expand with new software features,
• application sessions without the controller in use demo mode,
• small - compact weather - resistant housing,
• a switch with an integrated buzzer – only 3 wires are required for connection.
Simple installation

• no connection cable to the reading of rotation, the controller calculates them based on the time of injection
• in most case it is not necessary to connect the ignition signal
• a switch with an integrated buzzer – only 3 wires are required for connection
• gas level indicator CES (H) is powered directly from the solenoid valve mounted on the cylinder.

Simple calibration:

• all functions are arranged on two panels and no tab switching is required,
• build-in standard and expert function. Mode of standard contains the minimum functions necessary that to set up the car. However, at any moment by pressing the switch to expert where the advanced more functions of the controller,
• if the PC communication cable has been disconnected, the controller attempts to restore transmission itself,
• support of controller too with Bluetooth Next.

Functionality:
• new hardware platform based on a 32-bit processor,
• fail-safety – use the components of automotive,
• optional extension with new application features,
• application sessions without the controller in use demo mode.
Application functions:
• preview of working parameters on the oscilloscope,
• petrol injection time map 2D,
• the fuel LPG / CNG,
• engine RPM signal filter,
• operation with various types of injection control (standard, doubling),
• setting of maximum load on the gas engine,
• engine type, standard or turbocharged,
• intelligent post-injection
• integrated corrections for temperature and pressure of gas,
• mazda Leaning ™,
• gas injectors heating,
• map of correction based on gas temperature,
• reducer pressure reduction upon cut-off (discharge),
• setting of the allowed number of emergency starts,
• Sound alarm for emergency start
• Hot start (start stop),
• automatic setting of gas level,
• “Leaning on cold engine” option – limiting the maximum injection time on a cold engine (VAG),
• detection of gas pressure sensor fault

Product Details:

Approx. Price: Rs 13,500 / PackGet Latest Price

 

STAG Q-GenerationSTAG Q-Generation  is a line of modern STAG autogas ECU (engine control units) modules (QBOX, QNEXT, and QMAX) developed by the most experienced engineers working for STAG.STAG Q-Generation ECUSTAG Q-Generation ECU modules are high-technology controllers with extensive features for a perfect adjustment of the autogas system for all types of multi-point port injection engines. Autogas ECUEngine type: Port fuel injection
Max cylinder no.: 4
Gas fuel type: LPG & CNG
ECU warranty: 5 years

Overview The latest premium-quality autogas ECU modules for 4-cylinder multi-point port injection engines. The autogas ECU module housing comes in two installation options: with an angled connection (in STAG QBOX PLUS) and a straight connection (in STAG QNEXT PLUS). This lets an installer place it in a most convenient way inside of the engine compartment.

 

 

Application features

• OBD auto-adaptation
• Proprietary ISA3 auto-adaptation
• Supports CAN and K-LINE with OBD2/EOBD compliance
• OBD tool with automatic DTC deletion
• Fuel source overlap during supply switchover
• FLE-JC fuel level emulator (for Japanese makes)
• FLE-FC fuel level emulator (for French makes)
• Elbow connection port (QBOX PLUS) or straight connection port (QNEXT PLUS): 48 pin
• Supports Bluetooth connectivity
• Supports parameter recorders
• Supports mobile apps

Request
Callback